CATALYTIC ALKYLATION OF C2-C4 HYDROCARBONS

Authors

  • Bolysbek Utelbayev Kazakh British Technical University,Kazakhstan
  • Tasmagambetova Aigerim Kazakh British Technical University,Kazakhstan
  • Toktasyn Raila Kazakh British Technical University,Kazakhstan
  • Markayev Yergali Kazakh British Technical University,Kazakhstan
  • Myrzakhanov Maxat Kazakh British Technical University,Kazakhstan

Abstract

The aim of this paper is development putting metals on pillar structured clay for catalytic alkylation of light hydrocarbons. The pillar structured bentonite obtained with modifying polyhydrocomplex of chromium (III) chloride. Pillar structured bentonite was used for preparation 0.5-1.0% Ru/Carrier (modifying bentonite) support catalysts where is realized alkylation of C2-C4 hydrocarbons. Process of alkylation is carried out at partial pressure of hydrogen 0.5-1.0MPa. The outcome of high octane number components 2.2.4 three-methylpentane and 2.2.3 three-methylpentane achieved about 40%. At alkylation butane-butene mixture yield of isooctane achieved 60%.

Downloads

Download data is not yet available.

Downloads

Published

2015-03-01

How to Cite

Utelbayev, B., Aigerim, T., Raila, T., Yergali, M., & Maxat, M. (2015). CATALYTIC ALKYLATION OF C2-C4 HYDROCARBONS. European Scientific Journal, ESJ, 11(3). Retrieved from https://test.eujournal.org/index.php/esj/article/view/5056

Issue

ESJ FEBRUARY 2015 /SPECIAL/ EDITION VOL.2

Section

Articles

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)